Gryphon Athena - Manual (Page 12)

and NAME INPUT will appear in
the display. To exit the Menu,
press an Input button so that
EXIT blinks in the display, then
press Monitor to return to normal
playback and to the normal dis-
play. Any settings which you
have changed are automatically
stored in memory.
Naming Inputs
You can assign a specific name
to each input, either a pre-pro-
grammed standard name or a
custom name of your choice of
up to 8 characters. When NAME
INPUT appears in the display,
press Monitor. SELECT INPUT:
1 will appear in the display. To
choose a different input for nam-
ing, press an Input button to
move up or down through the
five inputs. When the number of
the input which you wish to
name is displayed, press
Monitor. CUSTOM will blink in
the display. If you wish to create
a custom name for the input,
press Monitor and skip to section
1.a. below. If you wish to select a
name from the standard list,
press an Input button so that
STANDARD blinks, then press
Monitor and skip to section 1.b.
below. Please note: If a name
has previously been assigned to
the input, that name will be delet-
ed if you press Monitor while
STANDARD is blinking.
1.a. If you have choosen custom
naming, the selected input num-
ber will appear in the second
line, followed by a colon (:) and a
cursor marking the first position
in the 8-character name which
you can create. If a custom
name has already been
assigned to this input, it will be
displayed. To select a character
(letter, number, symbol, empty
space or punctuation mark) for
the first position, continuously
turn the volume wheel, until the
desired character is displayed.
Press Input Up to move to the
next position, then use the
Volume wheel to select the
desired character. Repeat for
each character in the name. If
you make a mistake or change
your mind, use the Input Down
button to move back and change
a previously selected character.
When the name is complete,
press Monitor. The name is now
stored in memory and will be dis-
played each time you select that
input. NAME INPUT will appear
in the display. You can go back
to step 1 above to name another
input or press Menu to select the
next menu-controlled function.
1.b. If you have chosen standard
naming, the selected input num-
ber and the first name in the
standard list (CD) will appear in
the second line. To select the
name which you wish to assign
12