Gryphon Athena - Manual (Page 16)

16
Restoring Default
Settings
You can delete all of your custom
Menu settings and return to the
factory pre-set default settings.
Doing so deletes all input
names, sets Maximum Level at
50, sets Start Level at 00, sets
Brightness at 100% and sets
Input 3 as a normal audio input.
When RESTORE SETTINGS
appears in the display, press
Monitor. RESTORE? appears in
the first line of the display. NO
and YES appear in the second
line. NO will blink. If you do NOT
wish to delete your custom set-
tings, press Monitor, while NO is
blinking, then press Menu to
select the next menu-controlled
function. If you do wish to delete
all your custom settings, press
Input Up until YES blinks, then
press Monitor. You have now
deleted all your custom settings.
The factory pre-set default set-
tings are now in effect.
RESTORE SETTINGS will
appear in the display. Press
Menu to select the next menu-
controlled function.
Exiting the Menu
When CONTINUE and EXIT
appear in the display, you can
either exit the Menu or return to
the beginning of the list of menu-
controlled functions.
To go to the top of the list, press
Monitor while CONTINUE is
blinking.
To exit the Menu, press an Input
button so that EXIT blinks, then
press Monitor to return to normal
playback and to the normal dis-
play.
AC Fuses
The Athena powersupply has 1
AC fuse holder, holding 2 fuses.
100-120v. countries: 1 AT
200 -240v. countries:500m AT
5x20 mm fuse dimensions.
DO NOT REPLACE WITH ANY
OTHER FUSE VALUE.