Hanna Instruments HI 955201 - Manual (Page 14)

27 26
TIME
DATA TRANSFER TO PC
HI 955301 and HI 955302 feature infrared
emitting circuitry.
Set the meter to TIME mode
and place it on a HI 9200
infrared transmitter while en-
suring that the infrared LEDs
of instrument and interface
match. The memory can be
downloaded to a PC through
an RS232 port.
During the data transfer the
instrument displays the mes-
sage "r 232".
Using the HI 9200 infrared transmitter, all
recorded data can be fed to your PC for easy
reproduction, storage or elaboration without
the interference of cables or cords between
the meter and the transmitter.
Data transmission from the instrument to the
PC is handled with the HI 92000 Windows
®
compatible software by HANNA instruments ® .
HI 92000 offers a variety of features to help
you in all situations.
Windows ® is registered Trademark of "Microsoft Co."
Press UP again to view the temperature.
With HI 955302 when both probes are con-
nected, press the UP key to view the other
channel value.
Step 6 - Printing stored data (samples #5
through #10)
Press and hold the ALT key, then press
DOWN until the total number of samples
recorded in log #1 is displayed.
Scroll through the sample numbers by using
either the UP or DOWN key until #5 appears.
Press ALT and PRINT.
The meter will printout
samples # 5, 6, 7, 8, 9
and 10 consecutively.
UP DOWN
PRINT
ALT
UP CH
°C
DOWN ALT