Hanna Instruments HI 9828 - Manual (Page 20)

20
Chapter 3 - SETUP MODE
A few parameters have to be set before taking any measurements. In the main
menu two setup items are available: “Measurement” and “System”.
The measurement setup allows to set the displayed readings and their units,
while the system setup is used to set the system parameters, as the interface
language, date and time, LCD contrast, acoustical signals, etc.
3.1 MEASUREMENT SETUP
• Switch the meter on by pressing On/Off.
After the initialization has been completed, the
meter enters the measurement mode. The active
softkeys are LOG and MENU.
• Press MENU, select “Measurement Setup” us-
ing the arrow keys, then press OK.
• The display shows the complete list of measur-
able parameters.
• To select a parameter, scroll with the arrow keys.
It is possible to enable or disable each parameter. A checked box or the measure
unit means that the parameter is enabled. Press the right softkey to enable or
disable the parameter.
For some parameters it is also possible to select the measure unit and the reso-
lution by pressing the UNIT or RESOLUTION softkey.
NO NO NO NO NOTE TE TE TE TE If the password is enabled, the meter will ask to insert it prior to change
the first parameter.
Temperature
The user can select the measure unit: K, °F or °C.