Hanna Instruments HI 9828 - Manual (Page 42)

42
Plot
• Press PLOT and the list of the available param-
eters for the selected lot will appear.
• Use the arrow keys to scroll and select the de-
sired parameter. Press OK to view the graph.
• Use the arrow keys to move the cursor in the
graph and highlight a sample. The sample data
are displayed below the graph.
• Press ESC to return to the parameter list.
• Press ESC again to return to the 3-option menu.
NO NO NO NO NOTE TE TE TE TE The number of lot samples that can be plotted is limited by the display
resolution. To view a complete graph download data to PC.
Delete
• Press DELETE and the meter will display the mes-
sage “The selected lot will be erased! Con-
tinue?”. Press YES to delete or NO to return to
the previous screen.
• To return to the LOG DATA menu, press ESC repeatedly.
5.2.2 Delete all lots
• If the “Delete all data” option is selected, the display shows the message “All
stored log data will be erased! Continue?”. Press YES to delete or NO to return
to the previous screen.
5.2.3 Remarks
A remark can be associated to each sample.
• To add a remark, use the arrow keys to scroll
and highlight the REMARKS option. Press OK to
confirm the selection.
• The display shows the list of memorized remarks.
• Press NEW to insert a new remark. A text box
appears to insert the desired information.
• Press DELETE to cancel an existing remark.
NO NO NO NO NOTE TE TE TE TE During logging each reading can be associated to a remark either se-
lected from a previously created remarks list or new. See paragraph
5.1.1 ”Logging options”.