Hanna Instruments HI 9828 - Manual (Page 44)

44
ID Æ S/N
This option allows to view the tag serial number related to an ID.
• Select IDÆS/N and press OK.
• Insert the identification code using the key-
board and then press OK.
• The tag information window will appear. Press
OK to return to the previous screen or MODIFY
to modify the tag ID.
NO NO NO NO NOTE TE TE TE TE If the inserted ID is not present in the
memory, a warning message advises
the user.
Add tag manually
An ID code can be associated to a tag even if the tag is not physically available.
• Select the proper option and press OK.
• Insert the tag serial number using the keyboard and then press OK.
• Insert an ID code for the added tag and then press OK.
• The meter will now display all information just entered.
Clear tag memory
The tag memory can be completely cleared.
• Select the “Clear tag memory” option and press OK.
• The display will show the message “All tag identifiers will be erased. Continue?”.
• Press YES to confirm tag erasing or NO to return to the previous screen.
• To return to measurement mode, press ESC repeatedly.