Harmonic Resolution Systems S1 Isolation Base - Manual (Page 2)

Introduction
Thank you for purchasing the Harmonic Resolution Systems S1 Isolation Base.
When used properly, it will give you many years of superior musical or video
signal reproduction.
The S1 Isolation Base significantly reduces the negative impact of structure borne
vibration on your audio or video component performance. Many years of
engineering experience, custom material development, and listening tests are
incorporated into the design of the S1 Isolation Base. The performance of the S1
Isolation Base will enable your audio/video source and amplification components
to achieve a very high level of performance.
The S1 Isolation Base is an excellent match with HRS Damping Plates and Nimbus
products. While the S1 Isolation Base works to significantly reduce structural-
borne vibration, the HRS Damping Plates and Nimbus products significantly
reduces the harmful effects of air-borne vibration and structural resonance on
your components.
Please read this manual completely prior to use of your S1 Isolation Base for set
up and product care instructions. Proper care of you S1 Isolation Base will ensure
optimum performance and an aesthetically pleasing appearance.
Safety Instructions
IMPORTANT WARNINGS!
Do not place any tall objects on the isolation base. A tall objects is any object with
a height that is greater than the length of the isolation base. A tall object is also
any object that has a height greater than its own width or length. Tall objects must
not be placed on top of the isolation base for any reason. The object may become
unstable and tip over causing damage to the component, adjacent objects, or injury
to people.