Harmonic Resolution Systems S1 Isolation Base - Manual (Page 6)

Care and Maintenance
The S1 Isolation Base is a very low maintenance item that will provide many years
of trouble free performance by applying these basic care instructions.
The top of the S1 Isolation Base is made from a hard anodized aircraft grade
aluminum. Clean the aluminum surface using a lint-free soft (non-abrasive) cloth.
Use a lightly damp cloth if required or use a spray wax pledge product to obtain a
nice luster finiah. Do not use any solvents and do not use any abrasive cleaners
or abrasive materials on any part of the isolation base.
Do not spray, soak, or submerge the isolation base in water or any cleaning
solutions. The isolation base is an assembly of many different parts and materials.
Submerging the isolation base will cause permanent damage to the assembly.
Do not wash the interior flex element of the isolation feet even if you see a coating
or white substance on the surface of the flex element. This coating is intentional
and is put in the flex element to protect the custom isolation material from the
environment
Warnings!
Do not place objects with sharp or pointed feet directly on the isolation base.
Do not immerse in water or spray with water or any other liquids.
Do not use abrasive cleaners or abrasive sponges.
Do not wash the base or isolation feet with any solvent based cleaning solutions.
Do not wash the interior flex element of the isolation feet even if you see a coating
or white substance on the surface of the flex element.