Harmonic Resolution Systems S1 Isolation Base - Manual (Page 5)

Specifications
The following specifications are based on your S1 Isolation Base part number.
The part number is composed of the following information sequence.
Series - Model Number - Load Range
S1 Isolation Base Physical Characteristics
Model Number Dimensions
inch (cm) Weight
lbs. (Kg)
1921 19 x 21 x 3
( 48.3 x 53.3 x 7.6 )
35 (15.9)
1719 17 x 19 x 3
( 43.2 x 48.3 x 7.6 )
29 (13.2)
S1 Isolation Base Load Range
Load Range Supported Equipment Load Range
lbs. (Kg)
RD - (Red mark on bottom of
isolator) 0 –45 (0 – 20.4)
GN - (Green mark on bottom of
isolator) 45 – 75 (20.4 – 34.1)
BL - (Blue mark on bottom of
isolator) 75 – 135 (34.1 – 61.4)
Note: Special load ranges are available by custom order