Harmonic Resolution Systems R1 Isolation Base - Manual (Page 4)

The ideal isolation base setup is to have the center of gravity of the component in
the geometric center of the isolation base. This will result in even loading of the
isolation feet. This can be achieved by estimating the center of gravity of your
component and placing it in the geometric center of the isolation base. Even
loading of the isolation feet can also be achieved by moving the component until
the isolation base is level.
Top View
Component and Isolation Base
If you have a component that does not allow you to locate the center of gravity
near the geometric center of the isolation base, you can utilize a custom
combination of isolation feet to accommodate a significant variation in isolator
loading. Please consult with your authorized HRS Retailer or HRS directly if you
have questions regarding proper loading of your R1 Isolation Base.