Harmonic Resolution Systems R1 Isolation Base - Manual (Page 6)

Care and Maintenance
The R1 Isolation Base is a very low maintenance item that will provide many
years of trouble free performance by applying these basic care instructions.
Clean the surfaces of the R1 using a lint-free soft (non-abrasive) cloth. Use a
lightly damp cloth if required or use a spray wax pledge cleaning product to
obtain a nice luster finish. Do not use any solvents and do not use any abrasive
cleaners or abrasive materials on any part of the isolation base.
Do not spray, soak, or submerge the isolation base in water or any cleaning
solutions. The isolation base is an assembly of many different parts and
materials. Submerging the isolation base will cause permanent damage to the
assembly.
Do not wash the interior flex element of the isolation feet even if you see a coating
or white substance on the surface of the flex element. This coating is intentional
and is put in the flex element to protect the custom isolation material from the
environment
Warnings!
Do not place objects with sharp or pointed feet directly on the isolation base.
Do not immerse in water or spray with water or any other liquids.
Do not use abrasive cleaners or abrasive sponges.
Do not wash the base or isolation feet with any solvent based cleaning solutions.
Do not wash the interior flex element of the isolation feet even if you see a coating
or white substance on the surface of the flex element.