Specifications - ht b17, Specifications – Hatteland Display HT B18 (Fanless) User Manual

Page 28

Advertising
background image

28

IND100129-120

Specifications - HT B17

SPECIFICATIONS

Note: All specifi cations are subject to change without prior notice!

Please visit www.hatteland-display.com for the latest electronic version.

2/2

• 270.00 (W) x 57.95 (H) x 310.00 (D) mm

• 10.63" (W) x 2.28" (H) x 12.20" (D)

• Weight: Approx 5 kg

• Aluminium Cooling Chassis

• Power push button, power led, reset button and SSD Led

Multi-power Supply:

• 115&230VAC - 50/60Hz + 24VDC

: Model HT B17 STx-Axxx (60W) (STD IEC + 1 x 2p D-SUB (male) - Amphenol FCC17)

Note: You may connect either AC power or DC power or both. In case both sources are connected, power will be sourced from the

AC input. If AC input is lost, there will be a uninterrupted switch-over to DC input.

• Power Consumption - Operating

: 30W

• Operating

: Temperature -15 deg. C to +55 deg. C

Humidity up to 95%

• Storage

: Temperature -20 deg. C to +60 deg. C

Humidity up to 95%

Compass Safe Distance HT B17 STx-Axxx - Standard: 75cm - Steering: 45cm - MTBF (Mean Time Between Failures) = 44622 hours

HT B17 ST0-A100 with:

1 x Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz

2 x 1GB installed (Dual Channel DDR2 800/667MHz SO-DIMM 200-pin)

1 x SSD 40GB or more* 2.5" SATA

HT B17 STD-A101 with:

1 x Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz

2 x 1GB installed (Dual Channel DDR2 800/667MHz SO-DIMM 200-pin)

1 x SSD 40GB or more* 2.5" SATA

1 x Microsoft® Windows® Embedded Enterprise (XP Professional Eng w/SP2c, 32bit)

• Installed OS

: None for standard version (check Accessories / Options below for OS options)

• Processor

: 1 x Intel® Core™2 Duo Desktop Processor P8400 - 2.26GHz, Bus Speed 1066MHz, 3MB L2 Cache

• Memory

: 2 x 1 GB installed (Dual Channel 200-pin DDR2 800MHz SO-DIMM)

• Graphics

: Intel® Graphics Media Accelerator GMA 4500MHD Integrated/Daughter Board (CH7307C)

2 x DVI-D or 1 x DB15F + 1 x DVI-D

• Graphics Res.

: Max 1920 x 1200 @ 60Hz

(Note: For 1600x1200/1920x1200, DVI must be set to CVT-RB (Coordinated Video Timing-Reduced Blanking) mode manually).

• System Chipset : Intel® GM45 / ICH9 support Intel® Active Management Technology

• IO Chipset

: Winbond W83627DHG

• BIOS

: AWARD BIOS

• PCI Slots

: None

• Ethernet #1

: 1 x 10/100/1000Mbps, ICH9M Intel® 82567L

1 x RJ-45

• Ethernet #2

: 1 x 10/100/1000Mbps, Intel® 82574L PCI-E Gigabit LAN Controller

1 x RJ-45

• Serial Ports

: 1 x RS-232 (COM1)

1 x DB9M

• USB Ports

: 4 x USB ports - Supports 2.0 & 1.1

4 x USB Type A

• Keyboard Port

: Standard PS/2 mini DIN connector

1 x PS/2

• Mouse Port

: Standard PS/2 mini DIN connector

1 x PS/2

• Audio

: ICH9M+AC97 Codec ALC888, 7.1, RCA Jack (Front Out,Line In,Mic,Center/LFE,Surround,Surround back 6 x JACKS

• Speaker

: No

• Power Manager : ACPI

• Watchdog Timer : Reset: 1 sec.~255 min. and 1 sec. or 1 min./step

• H/W Status Mont. : Temperatures, voltages & cooling fan status. Auto throttling control if CPU overheats

These products have been tested / type approved by the following classification societies:

IEC 60945 4th (EN 60945:2002)

IACS E10

ClassNK - Nippon Kaiji Kyokai

DNV - Det Norske Veritas

GL - Germanischer Lloyd

BV - Bureau Veritas

ABS - American Bureau of Shipping

LRS - Lloyd’s Register of Shipping

EU RO MR - Mutual Recognition

• HT 00244 OPT-A1 = 1 x Mounting Plate, RAL 9011

• HT 00228 OPT-A1 = 1 x Mounting Plate with cable relief, RAL 9011

• HT 00245 OPT-A1 = 1 x Mounting Bracket Kit (included with delivery)

• JH C01MF A-A

= 1 x USB Cable 1m, Type A to Chassis mount receptacle

• HT 00300 MSOS = OS options ->

http://www.hatteland-display.com/os

*Please see user manual/datasheet for more information

• 4GB (Dual Channel 200-pin DDR2 800MHz SO-DIMM)

T E C H N I C A L D E S C R I P T I O N

Power Specifications:

Physical Specifications:

Environmental Considerations:

Lifetime Considerations:

Even although the test conditions for bridge units provide for a maximum

operating temperature of 55°C, continuous operation of all electronic

components should, if possible, take place at ambient temperatures of only

25°C. This is a necessary prerequisite for long life and low service costs.

M E C H A N I C A L D E S C R I P T I O N

Available Models:

* Size indicated is the lowest size available/approved for current revision of data sheet. The unit will support increased disk space in future. Please contact sales for up-to-date status.

Computer Specifications: (Standard model)

External Connector Type:

A P P R O V A L S & C E R T I F I C A T E S

Available Accessories:

Capabilities / Prepared for:

• HT B17 ST0-Axxx

= No OS

• HT B17 STD-Axxx = Microsoft® Windows® Embedded Enterprise (Win XP Pro Eng w/SP2c, 32bit)

• HT B17 ST3-Axxx

= Microsoft® Windows® Embedded Enterprise (Win Server 2003 Eng, 32bit)

• HT B17 ST7-Axxx

= Microsoft® Windows® Embedded Enterprise (Win 7 Pro Eng, 32bit)

• HT B17 ST8-Axxx

= Microsoft® Windows® Embedded Enterprise (Win Server 2008 Eng, 32bit)

Models without/with OS:

For a full overview of typenumbers, please review the following link:

www.hatteland-display.com/pdflink/ind100780-5.php

Advertising
This manual is related to the following products: