Heath Consultants Gas Delivery Unit (GDUnet) - Manual (Page 51)

net
3-23
4. Select to store updated range.
3.4.3 Edit Gas Limit(s)
1. To edit the gas ‘Low’, ‘Target’ or ‘High’ value for a particular
range, highlight gas value in editing panel, e.g. ‘High’ limit
550.0, as illustrated in Fig. 3-29.
Warning: Care should be taken if editing gas limits.
2. Type new value in editing panel.
3. Select to store updated value.
3.4.4 Edit Default Conversion Factors
The advanced Editor window displays the default conversion
factors for Methane, Pentane, Propane and Butane calibration
gases, as illustrated in Fig. 3-30.
Fig. 3-30 Default Conversion Factors
1. To edit the conversion factor (Methane in example), highlight
value in panel adjacent to gas type, as illustrated in Fig. 3-30.
2. Type new conversion factor value in panel.