LG Motorsports LG Diff and Trans Cooler - Manual (Page 6)

Instructions continue for those with complete kits below:
Next will be mounting of the coolers. For C5 Corvettes we suggest mounting the coolers
inside the rear fender liners. C6 customers can do this as well, or you can mount in the
rear of the car (brackets not supplied). You will need to remove the inner fender liners
and one of the fuel tank shield bolts to mount the coolers in place. Before mounting the
coolers to the brackets take a moment and install the four setrab fittings to the coolers
using a little Please secure the cooler as shown in the below figures to the brackets, and
the brackets then to the car with the fittings placed towards the inside of the car.
Figure 5: Driver side cooler mounted
Figure 6: Passenger side cooler mounted