LG Motorsports LG Diff and Trans Cooler - Manual (Page 8)

ADVANCED INSTALL:
For those wanting to add a bit more air flow through their system on C5Z06’s or C5’s
equipped with the rear brake ducts. You will need to remove the inner brake duct, and
trim the outside duct slightly for the cooler. Once the cooler is in place and mounted, cut
a rectangle from the inner fender as shown in the figures below and line with a course
screen material. This will allow air flow from the outside of the car to go through the
coolers and then exit through the rear fenders.
Figure 7: Driver side cooler and screen installed
Figure 8: Driver side cooler and screen installed