LG Motorsports LG C6 Z06 Adjustable Exhaust Switch - Manual (Page 4)

Figure 3: Installing the new trim plate with switch (lighted switch shown)
After the ground strap has been installed on the tunnel side you only have one more item
that needs to be done, and that is plugging in the wires into the fuse panel located behind
the passenger side foot well. The fuse panel is easy to access as you just need to reach
front the top of the foot well and pull the carpet down as this is a hidden door that will
allow access to the fuses. The panel is shown with the door open in figure 5.
Firgure 4: Installing the ground strap
If you have a lighted switch this next step is important for correct operation of the light.
You need to make sure and install the plug with the white dot facing upwards (on the
production units this will be a red wire and this will be plugged in on the right side of the
two wires) as shown in figure 6.