Lumagen Radiance XE-3D - Manual (Page 10)

Section 2 – Overview
RadianceXE rev 091211 4
HDMI Connections
6 HDMI SD/HD Inputs. Supports resolutions from 480i/576i up to 1080p60
2 HDMI SD/HD Outputs. Supports resolutions from 480p/576p up to 1080p60
Note: The HDMI CEC-bit pass-through is connected from the HDMI inputs to HDMI Output 1 only.
Analog Video Input Connections
4 Component / RGsB Inputs / RGBcvS. Supports resolutions up to 720p60, 1080i30. Input
10 can be used as an RGBHV Input. In this Mode VSync uses Input 17, and HSync uses
Input 18. Each of these inputs can support RGBcvS. For this RGBcvS, an input is
combined with the adjacent composite video input (i.e. Input 7 + cvS on Input 15).
4 S-video Inputs. Supports NTSC, PAL and SECAM.
4 Composite Inputs. Supports NTSC, PAL and SECAM.
Audio Input and Output Connections
4 Stereo Analog Audio Inputs
2 Optical Digital Audio Inputs
6 COAX Digital Audio Inputs
2 COAX Digital Audio Outputs
Miscellaneous Connections
2 Trigger Output (12V at 100mA inductive, or 250mA non-inductive, load)
1 LVTTL IR format command input (See Tech Tip 9).
1 RS232. Used for command and for software update (See Tech Tip 6 and 11).
1 Power Input (12 Volts DC)