Lumagen Radiance XE-3D - Manual (Page 19)

Section 4 – Basic Commands
RadianceXE rev 091211 13
Status Screen
Pressing “OK” when the menu is off displays an on-screen information message as shown in the example below.
RadianceXE-3D Info Pg 1 (for Pg 2 press Ok)
SW Rev.xxxxxx Serial:xxxxxxxxx
Input 1A Out1 Out2
Resolution: 480i 1080p 1080p
Refresh: 59.94Hz 59.94Hz 59.94Hz
Color Fmt: YCbCr 422 RGB RGB
HDCP: On On Off
Pressing “OK” when the information screen is displayed, will display a second status screen as shown in the
example below.
RadianceXE-3D Info Pg 2
Audio:HDMI1
In aspect=16:9 Out aspect=1.78 Zoom=0%
X scaler: On AdjInHres: 1914 OutHRes:720
Y scaler: On AdjInVres: 1077 OutVRes:480
Genlock: currently off
Deinterlacing:NA Game mode:Off
On-Screen Help
Pressing, “HELP” when the menu is displayed, displays on-screen help information for the currently highlighted
menu item for many of the menu options.
PiP/PoP
There is a versatile PiP (Picture-in-Picture) and PoP (Picture-outside-Picture) feature. For PiP a second video input
is superimposed in a window on top of the main, full screen, video window. The PoP feature reduces the size of
the main window and puts a second input in a window beside the main window.
There are 10 PiP/PoP mode memories available (0 – 9). Each PiP/PoP mode memory has independent settings for
PiP verses PoP, video input, position, size, density (transparency), aspect ratio, and user memory. The PiP
commands are:
PiP OFF: Turn off the PiP/PoP feature
PiP SEL: Turn on the PiP/PoP feature. You can then select a PiP/PoP input
PiP SWAP: Swap the main and secondary windows
PiP MODE: Turn on the PiP/PoP feature. You can then select a PiP/PoP mode
For more information see the PiP/PoP Setup section.
Quick Keys
Provides a menu to use for basic remotes that have limited buttons, The ‘Quick Keys’ menu has buttons for input
aspect ratio (4:3, LBOX, 16:9, 1.85, 2.35, NLS), set zoom (Zoom+, Zoom-) and select the user memory (MemA,
MemB, MemC, MemD). The “Quick Keys” menu duplicates the function of pressing the corresponding buttons on
the Lumagen remote. There are also buttons to control 3D (off, SbyS, TopB).
MENU → Quick Keys → (4:3, LBOX, 16:9, 1.85, 2.35, NLS, Zoom+, Zoom-, MemA, MemB,
MemC, MemD, ‘3D’Off, ‘3D’Sbys, ‘3D’TopB)