Simply connected, Advanced settings, Warnings and safety information – Luxul XAP-1230 User Manual
Page 9: Connect a client device, Login
Simply Connected
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9
the computer to be used for configuration. To do so, set the IP address of the com-
puter to the 192.168.0.X range and then use the default IP address of your XAP-1230
as the Gateway/Router. Once configured, set the computer IP configuration back
to “Obtain Automatically/DHCP.”
NOTE: Go to
http://luxul.com/how-to-videos
for videos about
changing the IP address of your Operating System.
Connect a Client Device
Connecting a Wireless Client Device: Connect the client device to the XAP-
1230 default wireless network
Luxul1230. This wireless network will run in Open
Security mode. A passphrase is not required until Wireless Security is configured.
Login
Login to the XAP-1230 with the following steps:
1. Open a Web browser, and enter 192.168.0.10. The access point login screen
will appear.
2. Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the access point
configuration interface.
ADVANCED SETTINGS
For advanced settings information go to luxul.com
WARNINGS AND SAFETY INFORMATION
Verify that the electrical circuits have appropriate grounding and overload protection.
Attach only approved power cords to the device.
Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.
The XAP-1230 is designed for indoor use only. DO NOT place this outdoors.
DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to
minimize exposure to excessive heat or moisture.
Small parts and plastic bags used for packaging may be harmful to small children. KEEP All
ACCESSORIES OUT OF THE REACH OF CHILDREN!
The XAP-1230 may become hot when in use for extended time periods. This is normal and is not a
malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials.