Luxul XAP-1040 - Manual (Page 11)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
11
CONFIGURATION
NOTE: Configuring the Luxul AP with non-Luxul routers may require
your computer’s IP address to be changed.
The Luxul XAP-1040 default IP addresss is 192.168.0.14. If the IP
address of your router is not set to the 192.168.0.X network,
a temporary static IP address must be set on the computer
being used for configuration. To do so, set the IP address of the
computer to the 192.168.0.X range and then use the default IP
address of your XAP-1040 (192.168.0.14) as the Gateway/Router.
Once configured, set the computer IP configuration back to
“Obtain Automatically/DHCP.”
Go to http://luxul.com/how-to-videos for videos about
changing the IP address of your Operating System.
Login
The XAP-1040 is not equipped with internal DHCP server. If connected to the Luxul
XBR-2300 Enterprise Dual-WAN Router, configuration will be automatic. Otherwise,
the IP address of the computer for login and configuration will need to be manually
configured. The table below lists the default parameters of the XAP-1040.
Parameter Default Value
Default IP address 192.168.0.14
Default user name admin
Default password admin