Luxul XAP-1040 - Manual (Page 4)

Quick Install Guide XAP-1040
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1040 0323150424
4
XAP-1040 Rear View
Bottom View
The bottom of the XAP-1040 provides one RJ-45 connection that is used to deliver
both power and data to the access point. When installation is complete, a weather
resistant RJ-45 connector gland will cover the RJ-45 connection.
XAP-1040 Bottom View
Inside View
For maximum weather resistance, all System LEDs and the Reset button are located
internally. Unless it becomes necessary to do so, opening the XAP-1040 is not
suggested. Note that there are no user serviceable parts. There is also a metal insert
for grounding power.
For troubleshooting, functional validation or system Reset, you will need to open
the XAP-1040. To do so, remove the 4 screws at the back of the unit. After doing so,
carefully lift the base up and to the right as demonstrated below: