Luxul XAP-1040 - Manual (Page 5)

Simply Connected
© 2015 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
View of XAP-1040 Opened
PREPARING FOR INSTALLATION
System Requirements
„
Devices Supporting 802.11b, 802.11g or 802.11n
„
Web Browser (Microsoft IE 8.0 and up, Mozilla Firefox 10 and up, Safari 2.0 and
up, Google Chrome 4.0 and up, Opera 10 and up)
„
CAT5 Ethernet Cable
„
AC Power Socket (100 – 240 V, 50/60 Hz)
„
Internet Connection to View Documentation Online
CAUTION: Before removing the cover and/or attempting to service the
XAP-1040, be sure to unplug all cables and dismount the device.
Use caution to see that no external elements are introduced
inside the enclosure and that reasonable precautions are taken
to minimize static and electromagnetic contamination of the
electronic components. Avoid touching any of the internal
electronics, except in the case of a Reset.
CAUTION: When lifting the base, be careful not to pull, bend or
otherwise move the base or cover excessively. By simply
lifting the base slightly, you should be able to see the LEDs
as well as access the Reset button. When re-assembling the
unit, be sure to maintain the weather-resistant integrity of
the enclosure by verifying that the rubber seal is properly
seated and the four screws are fi rmly in place, but not
over-tightened.