Dynex DX-LCD37-09 - Manual (Page 14)

14 Using your TV
2 Press or to select LANGUAGE, then press ENTER.
3 Press or to select English, Español, or Français, then
press ENTER.
4 Press MENU to close the menu.
Changing channels
To change channels:
• Press CH or CH to select a channel in the channel list.
• Press the number buttons for the channel you want, then press
ENTER or wait a few seconds.
• Press RECALL to go to the previous channel.
• To select a digital sub-channel, press the number button for the
main channel, press —, then press the number button for the
sub-channel.
Most digital TV channels have more than one channel. The main
channel carries the signal for the main TV program. The
sub-channels carry signals for additional or alternate
programming, such as a radio or news broadcasts.
For example, if the main channel number is 8, the sub-channel
number might be 8-1, 8-2, or 8-3.
Note: No Signal appears when the sub-channel program ends.
Adjusting the volume
To adjust the volume:
• Press VOL or VOL to increase or decrease the volume. The
Volume bar appears at the bottom of the screen.
Adjusting the picture
To adjust the picture:
1 Press MENU. The on-screen menu opens.
2 Press or to select PICTURE, then press ENTER.
3 Press or to select the setting you want to adjust, then press
ENTER. You can select:
• Picture Mode—Press or to select Standard,
Dynamic, Movie, or News, then press ENTER.
• Brightness—Press or to decrease or increase the
brightness.
• Contrast—Press or to decrease or increase the
contrast.
• Color—Press or to adjust the color.
• Tint—Press or to adjust the tint.
• Sharpness—Press or to decrease or increase the
sharpness.
• Reset Settings—Press ENTER to reset the picture settings
to the factory default.
• Color Temp.—Press or to select Cool, Neutral, or
Warm, then press ENTER.
• Energy Saving—Press or to decrease or increase the
brightness of the backlight.
4 Press MENU to close the menu.
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens.
2 Press or to select SOUND, then press ENTER.
3 Press or to select the setting you want to adjust, then press
ENTER. You can select:
• Treble—Press or to adjust the treble.
• Bass–Press or to adjust the bass.
Language Language
Select the language for setup display.
Elija el idioma de ajuste.
Sélectionner langue écran config.
Español
Français
English
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Energy Saving
Dynamic
30
Neutral
Off
60
36
0
0
Sound Sound
Treble
Bass
Surround
Reset Settings
0
0
Off