Palram SUNTU Rooflights - Manual

SUNTUF® Technical Guide
Profile: SUNTUF® 100
©PALRAM Industries. All rights reserved.
Profile Drawing
Profile Dimensions
Profile
(mm)
Thickness
(mm)
Length
(m)
Overall width
(mm)
Cover Width
(mm)
Side-Lap
( % )
250 / 40 1.0 – 2.0 1.5 - 11.8 1063 1000 5.9
Load / Span Data
Load
(kg/m²)
Maximum Roof Span (mm)
1.0 mm 1.2mm 1.5 mm 2.0 mm
Mid Field End Field Mid Field End Field Mid Field End Field Mid Field End Field
50 1800 1350 1850 1390 1900 1430 2000 1500
75 1600 1200 1650 1240 1700 1280 1800 1350
100 1450 1090 1500 1125 1550 1160 1650 1240
125 1350 1010 1400 1050 1450 1090 1550 1160
150 1250 940 1300 975 1350 1010 1450 1090
 The specified dimensions do not supersede the requirements of local construction codes.
 The maximum purlin spans are based on continuous beam calculation model and practical testing.
 The criterion for allowed deflections is L/20.
 The mentioned load refers to both wind and snow loads.
 Minimum recommended slope – 10%.
 For vertical application spans can be increased by 10%.
Panel Length
 Maximum recommended panel length - 7.0 m.
 Recommended longitude overlap of 200mm above purlin.
 Each panel to extend 100mm over the fixings line on the purlin.
 Panels should overhang Min. 50mm and Max. 150mm beyond the last fixings line.
Curved Roof
 Minimum curving radius 16.0 m.
20
0 mm
10
0 mm