ParkZone PKZ6375 - Manual (Page 11)

EN
Move the controls on the transmitter to make sure the aircraft control surfaces move correctly and in the proper direction.
After performing the Control Test, correctly set the failsafe. Make sure the transmitter controls are at neutral and the throttle and throttle trim are in the low posi-
tion, then rebind the aircraft to your transmitter. If the receiver loses its link to the transmitter, the failsafe will drive the servos to these settings made at binding.
Control Direction Test
Transmitter Command Aircraft Reaction
Elev
ator
Up Elevator Command
Down Elevator Command
Aileron
Stick Right
Stick Left
Rudder
Stick Right
Stick Left
Flaps
Flaps Down
11