Additional safety precautions and warnings, Removing and installing the landing gear – ParkZone PKZU2380 User Manual

Page 12

Advertising
background image

12

EN

Additional Safety Precautions and Warnings

As the user of this product, you are solely
responsible for operating it in a manner that does
not endanger yourself and others or result in
damage to the product or the property of others.

• Always keep a safe distance in all directions

around your model to avoid collisions or injury.
This model is controlled by a radio signal subject
to interference from many sources outside your
control. Interference can cause momentary loss
of control.

• Always operate your model in open spaces away

from full-size vehicles, traffi

c and people.

• Always carefully follow the directions and

warnings for this and any optional support
equipment (chargers, rechargeable battery
packs, etc.).

• Always keep all chemicals, small parts and

anything electrical out of the reach of children.

• Always avoid water exposure to all equipment

not specifi cally designed and protected for
this purpose. Moisture causes damage to
electronics.

• Never place any portion of the model in your

mouth as it could cause serious injury or even
death.

• Never operate your model with low transmitter

batteries.

• Always keep the aircraft in sight and under

control.

• Always use fully charged batteries.
• Always keep the transmitter powered ON while

the aircraft is powered.

• Always remove batteries before disassembly.
• Always keep moving parts clean.
• Always keep parts dry.
• Always let parts cool after use before touching.
• Always remove batteries after use.
• Always ensure failsafe is properly set before

fl ying.

• Never operate aircraft with damaged wiring.
• Never touch moving parts.

To remove the factory-installed landing gear,
gently pull the landing gear out of the fuselage.

Install in reverse order, making sure the landing
gear is fully seated in the fuselage.

Removing and Installing the Landing Gear

Advertising