Peg-Perego Primo Viaggio SIP 30-30 - Manual (Page 26)

⇠ 26
2• Adjust the restraint on the seat.
Check the red line to see that the
base is level with the ground. Thread
the lap belt through the slots on the
seat and lock the latch plate into the
buckle as shown.
3• Pull the strap to tighten the seat
belt. Press down on the seat with
your body weight and pull the strap
tighter. Once the seat is tight, check
that the red line on the side of the
car seat is level with the ground.
Warning!
If you cannot get the belt
tight enough, refer to your vehicle
manual for instructions on how to
secure the seat using the type of seat
belt in your vehicle. Your baby is not
safe riding in a loose car seat.