Peg-Perego Primo Viaggio SIP 30-30 User Manual
Page 39
⇠
39
This unit is certified for aircraft use.
1• Buckle the base to the aircraft seat
using the lap belt as shown. A
secondary belt path can also be used
as shown in Fig. B.
2• Position the base rear facing in
the aircraft seat. Check the level
indicator on the side of the base
to make sure that the ball is in the
green area. If it is not, turn the knob
left or right until it is in the correct
position.
3• Thread the lap belt through the slots
on the base and lock the latch plate
into the buckle.
4• Pull the seat belt strap to tighten the
base down. Press your body weight
down on the seat to tighten the belt
further. Check the level and adjust if
needed. Push and pull on the base. If
you can move it more than one inch,
How to Use the Car Seat on Aircraft with Base
A
B