Peg-Perego Primo Viaggio SIP 30-30 - Manual (Page 38)

This unit is certified for aircraft use.
1• Position the restraint on the seat,
adjust the handle so it rests at the
top edge of the car seat as shown.
Any other position may injure your
baby in an accident. To move the
handle, press the gray buttons on
the sides of the handle at the same
time and push the handle.
2• Adjust the restraint on the seat.
Check the red line to see that the
base is level with the ground. Thread
the lap belt through the slots on the
seat and lock the latch plate into the
buckle as shown.
3• Pull the strap to tighten the seat
belt. Press down on the seat with
your body weight and pull the strap
tighter. Once the seat is tight, check
that the red line on the side of the
car seat is level with the ground.
How to Use the Car Seat on Aircraft without Base
38
Important! Follow the harness
instructions beginning with “How to
Buckle Your Baby into the Car Seat”
(on page 28) to safely secure your baby.