Portable Winch AC Electric pulling/lifting winch PCT1800-60Hz-P - Manual (Page 23)

23
3.4.3.1 Releasing the tension
ALWAYS WEAR GLOVES.
STRETCH EQUALS DANGER!
DO NOT WRAP THE ROPE AROUND YOUR HANDS OR YOUR BODY!
ALSO BEWARE OF THE ROPE ACCUMULATING NEXT TO YOU; MAKE SURE YOUR FEET
DO NOT GET TANGLED IN IT.
3.4.3.1.1 When pulling with the rope grabbing system engaged
If the rope grabbing system is used, when you stop pulling with the PCT1800 AC Electric
Portable Capstan Pulling/Lifting Winch
TM , the rope grabbing system engages, therefore, applies
pressure on the rope and keeps it under tension. To release it, follow steps 1 to 6 of section
3.4.2.3).
3.4.3.1.2 When pulling with the rope grabbing system disengaged
If the rope grabbing system is not used, when you stop pulling with the PCT1800 AC Electric
Portable Capstan Pulling/Lifting Winch
TM , you simply have to release tension gradually to lower
the winch gently to the ground.
3.5 If the PCT1800 AC Electric Portable Capstan Pulling/Lifting Winch
TM
doesn’t work
PRIOR TO INSPECTING OR REPAIRING THE WINCH, BE SURE TO
DISCONNECT FROM POWER SOURCE.
If the winch does not work, check the power source. Make sure the voltage and/or the frequency
used is correct. Disconnect the wire from the electrical outlet and remove the lid of the control
box. Make sure there are no unconnected wires, poorly connected relays or loosened screws. If
the unit still does not work, contact a qualified electrician or your dealer.
4.0 Maintenance
When the unit is outside, make sure to thoroughly cover the engine and controls against the
weather or ground water. When the winch is running, make sure it is free of obstructions.
Periodic inspections must be made for damage or cuts to the various components which may
require replacement.
4.1 Cleaning
Once your job is done, you should clean and dry
your winch.