Rocktron Chameleon On-Line - Manual (Page 16)

13
MIXER Function
The next function displayed after turning the FUNCTION SELECT control is the Mixer function. The Mixer
function parameters are included in all presets - regardless of which configuration is currently recalled - although
the parameter values stored in this function are only for the currently recalled preset.
This digital mixer allows you to control most signal levels pertaining to each preset's configuration and stores
these levels for each preset.
The PARAMETER SELECT control will allow you to access these Mixer parameters:
The VOLUME parameter determines the overall signal level of the current preset.
The LEFT OUT LEVEL parameter allows you alter the level of the left channel output of
the current preset independent of the right channel.
The RIGHT OUT LEVEL parameter allows you alter the level of the right channel output
of the current preset independent of the left channel.
The DIR/EFF MIX parameter is used to define the ratio of direct signal level to effect
(Chorus, Flange, Pitch Shift) signal level.
The DIRECT PAN parameter allows you to pan the direct signal to the left or right.
The DELAY LEVEL parameter determines the overall level of the delayed signal at the
output relative to the direct signal and other effect signals. This parameter can also be
accessed from the Delay function parameter list.
The REVERB LEVEL parameter determines the level of the reverb signal at the output
relative to the direct signal and other effect signals. This parameter can also be accessed
from the Reverb function parameter list.
VOLUME
LEFT OUT LVL
RIGHT OUT LVL
MIX DIR/EFF
DIR PAN
DELAY LVL
REVERB LVL