Rocktron Chameleon On-Line - Manual (Page 51)

48
PHAS, H-GAIN, DLY, REV Parameter List (cont'd)
FUNCTION PARAMETER LIST RANGE
(via FUNCTION SELECT) (via PARAMETER SELECT) (via PARAMETER ADJUST)
SPEAKER SIM SPKR SIM (Speaker Simulator Status) Off, Left, Both
SPKR TYPE (Speaker Type) 15, 12, 10, 8, Full
MIC POSITION (Microphone Position) -15dB to +15dB
REACTANCE (Reactance Level) -15dB to +15dB
PHASER PHASER (Phaser In/Out Status) Out, In
DEPTH (Amount of Modulation) 0 to 100
RATE (Rate of Modulation) 0 to 254
RESONANCE (Amount of Feedback) 0 to 100
STAGES (Number of Stages) 4, 6
DELAY DELAY (Delay Status) Muted, Active
MUTE TYPE (Mute Type Status) Pre, Post, Both
DELAY LVL (Delay Level) -
∞
to 0dB
MIX (Source 1/Source 2 Mix Level) S1 <0 to 100> S2
SOURCE 2 (Source 2 Select) Dir, Voice 2
DLY HF DAMP (Delay High Frequency Damping) 0 to 99
OUT LEVEL 1 (Delay 1 Level) -
∞
to 0dB
PAN 1 (Delay 1 Panning) L <0 to 100> R
DLY TIME1 (Delay 1 Length) 0 to 1000ms
REGEN 1 (Delay 1 Regeneration) -
∞
to 0dB
OUT LEVEL 2 (Delay 2 Level) -
∞
to 0dB
PAN 2 (Delay 2 Panning) L <0 to 100> R
DLY TIME2 (Delay 2 Length) 0 to 1000ms
REGEN 2 (Delay 2 Regeneration) -
∞
to 0dB
REVERB REV INPUT (Reverb Input Status) Muted, Active
MIX (Direct/Delay Mix Level) Dir <0 to 100> Dly
REVERB LVL (Reverb Signal Level) -
∞
to 0dB
REV DECAY (Reverb Decay Length) 0 to 99
REV HF DAMP (Reverb High Frequency Damping) 0 to 99