Changing preset parameters – Rocktron Chameleon On-Line User Manual
Page 71
Advertising
68
Turn the FUNCTION SELECT control to select the function heading which contains the parameter(s) you
wish to change.
Turn the PARAMETER ADJUST control to alter the parameter value. The LED above the STORE button
will light, indicating that the preset has had a parameter altered from its stored value.
Step 3
The COMPARE button may now be pressed to compare the sound of the stored parameter value to the
sound of the altered parameter value.
Turn the PARAMETER SELECT control to the specific parameter you wish to change.
Changing preset parameters:
Step 1
Step 2
4
3
**** REVERB ****
REV DECAY
59
REV DECAY
32
REV DECAY
59
Step 4
1
2
Advertising