Rocktron MIDI Mate - Manual (Page 23)

20
MIDI Mate™ Manual
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
To enter the MIDI CHANNEL EDIT mode:
MIDI CHA 99
Step 1
Press the
"2ND" button to
turn the 2ND
L.E.D. on
Step 2
Press the EDIT FUNCTION SELECT
"à" button twice (or until "MIDI
CHANNELS" scrolls across the
display).
Wait for the scrolling to finish.
S1CH 1 99
Step 3
Use the ADJUST buttons to select the MIDI channel
that Set 1 is to be transmitted on (1-16 or OFF).
Match Set 1's MIDI channel with the MIDI channel
that the receiving device is set to.
After the scrolling has completed, "S1CH"
(Set 1 MIDI channel) will appear.
S2CH OFF 99
Step 4
Press the EDIT FUNCTION SELECT
"à" button to advance to the next
channel to edit (Set 2).
The MIDI on/off commands may be assigned to individual MIDI channels.
The continuous controller or pedal may be assigned to a MIDI channel also.
PRESS "2ND" ANYTIME TO EXIT EDITING
Continue to use the BANK (ADJUST) buttons to choose a MIDI channel for each set of additional program
changes.
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES