Rocktron MIDI Mate - Manual (Page 30)

27
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
Step 3
Press the EDIT FUNCTION SELECT "ß"
button once. "FACTORY REINITIALIZE" will
scroll across the display.
Step 4
* Use the BANK (ADJUST)
buttons to set the code
number to 244.
WAIT 128
Step 6
Press the 2ND button to exit
the editing mode.
Step 5
Press the STORE button. "WAIT" will be displayed while the
memory is being initialized. After it is complete, the message
"ERR 0" should be displayed. If this message is not
displayed, the memory may not have reinitialized properly.
! WARNING !
Completing step 5 will permanently erase the user memory
and replace it with the original factory memory!
* For those upgrading from previous software 1.x versions, a code number of "10" may be entered (instead of
244) to initialize all settings except the user titles.
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES
MIDI 128 128
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES