Rocktron MIDI Mate - Manual (Page 27)

24
MIDI Mate™ Manual
BANK
INSTANT
CONTROLLER
ACCESS 2ND 0 1 2 3 4
5 6 7 8 9
BANK
(ADJUST)
EDIT PRESET
SELECT
EDIT FUNCTION
SELECT
STORE
TITLES
MIDI CHANNELS
CONTROLLER ASSIGN
PROGRAM CHANGES
PROGRA 99
Step 1
Press the
"2ND" button to
turn the 2ND
L.E.D. on
Step 2
Press the EDIT FUNCTION SELECT "ß"
button once (or until "PROGRAMMABLE
PATCH CHANGES" scrolls across the
display).
Wait for the scrolling to finish.
To enter the PROGRAMMABLE PATCH CHANGES edit mode:
(Programmable Patch Changes are additional program changes that are programmed to be sent along with
the current SET1 program change)
Programmable Patch Changes Editing
Enter the editing mode by pressing the 2ND button so that the 2ND
LED lights while in any access mode. Now press the EDIT FUNCTION
SELECT buttons until "Programmable Patch Changes" scrolls across the
display. Allow the scrolling to finish to enter the Programmable Patch
Changes edit mode. Once the scrolling has finished, "SET2" will appear.
This is where additional patch changes may be programmed to be sent along
with SET1's patch change. SET1 is the patch change that is displayed by the
three character numeric display. SET2 through SET6 are additional patch
changes that can be sent along with SET1's patch change on their assigned
MIDI channels.
The number to the right of SET2 is the number of the patch change
that will be sent on SET2's assigned MIDI channel. SET2's patch change
may be changed by pressing the BANK (ADJUST) "
á" and "â" buttons. By
pressing the EDIT FUNCTION SELECT "
à" button, the user may access
SET3 through SET6's patch change in the same way.