Sonnox Oxford Limiter - Manual (Page 17)

8.2 Meter
Operation 8 RECONSTRUCTION METERING SECTION
8.2 Meter
Operation
When the RECON METER function is selected, the meter is switched
from conventional peak sample value mode into reconstruction mode.
In this mode peak reconstruction levels will be displayed on the meter.
Levels in the red overload range of the meter represent the presence of
potential reconstruction errors, as illustrated below using the previous
example:
Two methods are provided to correct for this:
8.3 Manual
Correction
Since the output level fader precedes the metering, errors may be corrected manually by
simply reducing the output level setting by the same amount as the maximum error level
reported on the meter.
www.sonnox.com 17 Go
to
contents