Sonnox Oxford Limiter - Manual (Page 37)

13 SPECIFICATIONS
its dynamic characteristics remain untouched.) This favours a more dynamic
sounding mix at the expense of sounding less loud.
Choice
3
–
Use
TRUE PEAK AUTO COMP mode
Enable AUTO COMP in True Peak mode. Enable dithering with noise shaping (if
needed), and replay your mix to confirm there are no clips. This will reduce the
output gain automatically with a fast time constant whenever the output level
breaches the 0dB max. This potentially produces the loudest sounding mix because
you do not need to reduce the general signal level to remove the clips. It will sound
the most compressed too.
Choice
4
–
Hard
Clip
If you need to enable dithering anyway, and the overs are only very small, you may
find that clipping the tips of the transients during the dithering process sounds
better than the other choices.
You are now ready to burn to CD or output to a DAC.
13 Specifications
13.1 Pro
Tools
|
HDX –
Instances
per
chip
48
kHz 96
kHz 192
kHz
Mono 6 3 1
Stereo 5 2 1
www.sonnox.com 37 Go
to
contents