Speck Electronics Xtramix - Manual (Page 13)

Merely affixing the Xtramix into an equipment rack is no guarantee that
the product is making a reliable ground connection. The mounting rails
in the equipment rack should never be depended upon for a ground
connection.
The following information is provided as a general guide for
repackaging your Xtramix for shipment. If you have any questions,
contact Speck Electronics direct. Our phone number is +760-723-4281.
If the product is to be shipped to Speck Electronics for service or repair,
attach a tag to the product, identifying the owner and indicating the
service or repair to be accomplished. Include the model number and
serial number of the product. Place the product in the original container
if available. If the original container in not available, a suitable one can
be purchased from Speck Electronics.
If the original container is not used, wrap the product in heavy plastic
before placing in an inner container. Use plenty of packing material
around all sides of the product and protect panel faces with cardboard
strips. Mark shipping container with "Delicate Instrument" or "Fragile",
and insure the shipment for the proper amount.
In most cases, it will be necessary to remove the rack mount adapters if
the unit is returned in its original shipping container. When remounting
the rack mount adapters, make certain you use the original mounting
screws supplied with the Xtramix.
Repacking For
Shipment
8
Rack grounding
Chapter 2 Initial Preparation