Star Headlight & Lantern ULB48 Lineum Dual-Color Traffic Director Interior LED Lightbar - Manual (Page 2)

-1-
The following mounting instructions describe the standard, most common way to
mount this light. This method may or may not apply to your vehicle. Because
vehicles can vary widely in their design, it may be necessary to configure the brackets
differently than described. Some applications may require you to design your own
custom brackets. The installer assumes all responsibility for the integrity of the
installation. It is the sole responsibility of the owner to ensure the light is secure.
Mounting
Please review the Programming section BEFORE mounting your light.
There are several options you may wish to set prior to installation.
P30094-10 (QTY=2)
#10-32 SERRATED FLANGE NUT
P30150-97-2P (QTY=2)
SLOTTED STRIAGHT BRACKET
P30093-5 (QTY=2)
#8 NUT
P30073-3 (QTY=2)
#8 TOOTH WASHER
P30150-97P (QTY=2)
DOUBLE SLOTTED "L" BRACKET
P30073-4
#8 FLAT WASHERS
P30053-29 (QTY=2)
#8-32 x 3 8 " PHILIPS HEAD SCREW
P30053-24
#8 x 3
8 " SELF-TAPPING PHILIPS HEAD SCREW
P30053-24 (QTY=6)
#8 x 3
8 " SELF-TAPPING PHILIPS HEAD SCREWS
P30073-4
#8 FLAT WASHER
P30150-79P (QTY=2)
FORKED "L" BRACKET (Style 1)
P30150-189P (QTY=2)
FORKED "L" BRACKET (Style 2)
P30076-8 (QTY=2)
1/4" FLAT WASHER
(USE AS SPACER)
P30054-27 (QTY=2)
#10-32 x 1/2" CARRIAGE BOLT
P30073-4 (QTY=12)
#8 FLAT WASHERS
P30150-220P (QTY=2)
ATTACHING BRACKET
The
Star Phantom ®
line of lights is designed to be
mounted on the inside of your vehicle. They are not intended for
exterior applications and are not warranted against water damage.
It is the sole responsibility of the owner to ensure the warning light is
secure. Check your light every time you enter the vehicle to ensure that
it is mounted securely. The manufacturer assumes no responsibility for
the secure mounting of this light.