Star Headlight & Lantern ULB48 Lineum Dual-Color Traffic Director Interior LED Lightbar - Manual (Page 9)

-8-
Programming (CONT'D)
Pattern Programming
Not only does this light have several Patterns to select from, but it also incorporates
advanced programming that allows you to select which heads flash On and Off with one
another (Phase), and which heads are active in any of the functions (Head Enable).
Patterns for Warning Lights
(Level 1, Level 2, and TD Warn/Pursuit)
1 Flicker *
2 Slow Singleflash
3 Fast Singleflash
4 Slow Doubleflash
5 Fast Doubleflash
6 Slow Tripleflash
7 Fast Tripleflash
(Level 2 default)
8 Quadflash
9 Quintflash
10 Tripleflash w/Post Pop
11 Quadflash w/Post Pop
12 Quintflash w/Pre Pop
13 Singleflash Flicker **
14 Doubleflash Flicker
15 Single, Quad w/Post Pop, Flicker
16 Delta-Omega
17 Moving Delta-Omega ***
18 Random 1
19 Random 2
20 Random 3
21 Flashing Bounce
22 Full Bounce
(Level 1 default)
23 Split Bounce
24 Half Bounce
25 Bounce w/End Pop
26 Search Lights
27 Eyeballz
28 Fade Invert
29 Singleflash w/Alternating Ends
30 Triple In/Triple Out
31 Two Speed
(Pursuit default)
* Shortcut Pattern #1 (3 sec/1 flash)
** Shortcut Pattern #2 (6 sec/2 flashes)
*** Shortcut Pattern #3 (9 sec/3 flashes)
C
a
lif
o
rn
ia
T
itl
e
1
3
S
A
E
J
5
9
5
A
p
p
ro
v
e
d
P
a
tte
rn
s
Basic Pattern Selection
The first step in programming is to select a basic pattern for each of the 4 modes:
• Traffic Director Warn Lights (or Pursuit, if applicable) (White w/Brown)
• Level 1 Warning Lights (Orange w/Green)
• Level 2 Warning Lights (Orange w/Red)
• Traffic Directing Patterns (L, C-O, and R) (Yellow or Green w/Yellow)
1. Connect the Red wire to power and the
Black wire to Ground.
2. Activate the function you wish to
program by connecting the
corresponding wire to +12VDC.
3. Touch and release the Green w/Red
wire to +12VDC to scroll through the
patterns shown to the right. (Traffic
Director L, C-O, R shown below.)
Note: At any time you can shortcut to
the patterns with the asterisks by
holding the pattern select wire to
+12VDC for the indicated time.
4. Repeat for each function you wish to
program.
Patterns for Traffic Director
(Left, Right, and Center Out functions
all use the same pattern)
1 Standard *
2 6-Head TD with End Flash
3 Standard w/End Blink
4 Two-Head Traveling
5 California Title 13 **
6 California Title 13 Fast
7 Four Head Traveling
8 Snake
9 Pop
* Shortcut Pattern #1 (3 sec/1 flash)
** Shortcut Pattern #2 (6 sec/2 flashes)
C
a
lif
o
rn
ia
T
itl
e
1
3
S
A
E
J
5
9
5
C
o
m
p
lia
n
t P
a
tte
rn
s
Please note: All California Title 13 and SAE J595 approved patterns need
to be configured properly to ensure compliance with those specifications.