Star Headlight & Lantern TD93DLXT User Manual
Page 5
-2-
(Mounting CONT’D)
Slide the bolt
heads into the
appropriate
slots.
5. Models with endcaps have the bolts
pre-installed. The additional bolts
enclosed in the hardware kit will not be
needed.
If yours are NOT installed, slide the
necessary number of bolts into the
appropriate channels on your traffic
director.
6. Slide the bolts to their desired location along the tracks and mount the bolts through pre-
drilled holes in your vehicle or mounting bracket. Use a flat washer, split washer, and
nut on the bolt. If you are using the L-brackets provided, you will need to supply
appropriate bolts or other fasteners to attach the brackets to your mounting surface.
Mount directly
to mounting
surface
OR
Mount to
enclosed
L-Brackets
Because of the wide variety of mounting applications,
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the secure mounting of this light. It is
the responsibility of the installer and/or owner to ensure
the lightbar is mounted securely. Check your light
every time you use the vehicle to ensure that it is
mounted securely.
CAUTION: Be sure to carefully inspect and test the
integrity of your mount.