Saf-te board lun set-up – StorCase Technology S10A100 User Manual
Page 14
Advertising
StorCase Technology, Inc.
SAFTEmon Users Guide - Rev. E00
14
S10A100
SAF-TE Board LUN Set-Up
NOTE:
Refer to the InfoStation RAID Controller Module User's Guide for further
information.
To set up the SAF-TE board into an InfoStation with RAID controller module installed:
1.
Select Configuration Menu from the RAID Controller Module Administrator Utility
System Menu (Figure 4) and press Enter.
2.
Select SEP Configuration and then press Enter.
3.
Select SEP LUN and then press Enter. The system will automatically assign the
next available LUN to the SAF-TE board.
4.
Type Y to confirm or N to cancel and press Enter.
5.
Reboot the system.
Figure 4: RAID Controller Module Administration Utility Configuration Menu
(Example shown, actual screen may vary)
Advertising