StorCase Technology S10A100 - Manual (Page 7)

SAFTEmon User’s Guide - Rev. E00 StorCase Technology, Inc.
S10A100 7
Figure 1: InfoStation SAF-TE Processor Board
INTRODUCTION
NOTE: The StorCase SAF-TE Processor Board for the InfoStation enclosure has been
designed and tested for use with StorCase SCSI-to-SCSI and Fibre-to-SCSI
RAID Controller Modules. Due to the many options and configuration types
associated with PCI-based RAID controllers, you may or may NOT experience
incompatibility when using the SAF-TE Board option in PCI-based RAID ap-
plications. Please contact StorCase Technical Support at (888) 435-5460
regarding apparent SAF-TE incompatibilities experienced with your implemen-
tation.
The StorCase ® Technology SAF-TE Processor Board (P/N S10A100) is an optional upgrade
for InfoStation 9, 10, 12, 14, and 16-Bay backplane enclosures.
Features include:
- Monitors status of each InfoStation blower, power supply module, and bay
- Monitors all chassis temperature sensors
- Dedicated, user-selectable SCSI ID (via the InfoStation User Interface)
- Supports multi-mode (LVD/S.E.) SCSI bus communication
- SAFTEmon ® management software included
- Field-upgradable firmware
- Fully compliant with SAF-TE Specification Rev. 1.0