Step 7: configure the flashlight – Taser X3 User Manual
Page 10
Advertising
Step 7:
Configure the Flashlight
The X3 ECD’s LED flashlight can be turned on or off, or set to adjust its intensity depending
on the ambient light (automatic).
To set up this feature, follow these steps:
1
Press and hold the selector switch ( ) until the MAIN MENU displays.
2
Press the left ARC ( ) switch.
3
Press the left ARC switch again to scroll through the options.
4
Press the selector switch to return to the MAIN MENU.
5
You can set the other options. If you are done configuring the X3 ECD, press the selector
switch again to exit.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
ON
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
AUTOMATIC
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
OFF
Advertising