Taser X3 - Manual (Page 9)

Step 6: Configure the Language
Be careful in selecting the language. If the CID suddenly becomes unrecognizable, the
wrong language may have been chosen. Selecting any language other than ENGLISH US
will result in all measurements displayed in metric.
To set the X3 ECD’s language, follow these steps:
1 Press and hold the selector switch ( ) until the MAIN MENU displays.
2 Press the right ARC switch ( ) until you are at the LANGUAGE menu.
3 Press the left ARC switch.
4 Press the right ARC switch until you are at the language you want to use.
5 Press the left ARC switch.
6 Press the selector switch to return to the MAIN MENU.
7 You can set the other options. If you are done configuring the X3 ECD, press the
selector switch again to exit.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
LANGUAGE MENU
ENGLISH UK
FRENCH
GERMAN
ENGLISH US
SPANISH