TracRac IM TracONE - Manual (Page 5)

TracRac Inc. 994 Jefferson St. Fall River, MA 02721 l 800-501-1578 Instruction Manual
These instructions will guide you through the 3 main component assemblies:
Upright units 1.
Cross bars 2.
Clamp units 3.
Please reference the drawing below for a general overview.
Tool you will need:
3/16” Allen Key •
7/32” Allen Key •
Tape Measure •
9/16” Socket and Socket Wrench •
Recommended: •
Torque Wrench
7/32” Allen Drive Bit
Non-Impact Drill
Installation Instructions
A
B