Using undo, cut, copy and paste – Turning Technologies ExamView User Manual
Page 64
ExamView Test Generator
64
l
With the Question Tags option turned on, the recalculate symbol appears in the left margin next to any questions
with dynamic content (algorithms).
NOTE
Questions marked with the recalculate tag will not necessarily change when you recalculate
your test or bank. The variables used in the question may be defined with a single value that
does not change, or the dynamic variables may be located in a narrative instead of the
question itself.
l
With the Question Tags option turned on, the bimodal symbol appears in the left margin next to any bimodal
questions.
Using Undo, Cut, Copy and Paste
How to undo typing or the most recent command...
1
Click
or press Ctrl+Z (PC) or Cmd+Z (Mac)
If the last command cannot be undone, the button will be disabled and the Edit menu will show Can't Undo.
2
Click
again to revert back to the original if you accidentally selected the Undo command.
How to cut (remove) text or pictures...
1
Select the text or picture or the row or column you want to remove.
2
Click
or press Ctrl+X (PC) or Cmd+X (Mac) to remove the text or picture. ExamView Test Generator cuts the text or
picture and places it on the Clipboard.
3
To remove text or a picture from a question without placing it on the Clipboard, click Edit and select Clear.
How to copy text or pictures...
1
Select the text or picture or the row or column you want copy.
2
Click
or press Ctrl+C (PC) or Cmd+C (Mac) to place a copy of the text or picture on the Clipboard.
Once you copy text or a picture, you can paste it into the same question, another question, or a different application. For
example, you can use a paint program to create an image, copy it, and then paste it into a question.
TIP
If you want to duplicate an entire question (except for matching groups) within the same test
or bank, use the Duplicate command in the Question menu. If you want to copy an entire
question to a different test, bank, or to a word processor, use the Copy command in the
Question menu.
turningtechnologies.com/user-guides