Changing the channel on a cps pulse clicker, Changing the channel on a cps spark clicker – Turning Technologies CPS User Manual
Page 8
CPS for PowerPoint Mac
8
Changing the Channel on a CPS Pulse Clicker
The clickers need to be set to the same channel as the receiver when polling.
1
Press the Power
button.
2
Simultaneously press both arrows
and release.
3
Press the
button.
Channel appears on the screen.
4
Enter the two-digit channel number.
NOTE
The channel number must be between 01 - 75.
5
Press the Enter
button.
Clicker # appears on the screen.
6
Enter the number found on the front of the clicker.
7
Press the Enter
button.
A summary appears on the screen, and the clicker turns off.
Changing the Channel on a CPS Spark Clicker
The clickers need to be set to the same channel as the receiver when polling.
1
Press the Power
button.
2
Simultaneously press both arrows
and release.
3
Press the
button.
Channel appears on the screen.
4
Enter the first digit of the channel number by pressing the
button to increase the number or the
button to
decrease the number.
NOTE
The channel number must be between 01 - 75.
5
Press the right arrow
to advance to the second digit and repeat step 4.
6
To save the channel number, press the right arrow
.
Clicker # appears on the screen.
7
Repeat steps 4 - 5 to enter the number on the front of the clicker.
8
Press the right arrow
to save the clicker ID.
A summary appears on the screen, and the clicker turns off.
turningtechnologies.com/user-guides