Turning Technologies Triton Proctor Application - Manual (Page 13)

Triton Data Collection System 13
tritondatacollectionsystem.com/triton-support
MARKING A PARTICIPANT
A Proctor can manually set the Login State while in the Exam Room. The available options for Login States vary based
on the status of the exam. For more information about the various states, see Login States on page 13.
• Upon entering the Exam Room and/or clicking Open, you can mark a Participant as Not Testing or Not Present.
• When a Proctor clicks Start, a Participant can be marked as Rejoin or New Device.
• When a Proctor clicks Stop, a Participant can be marked as Recovery or Complete.
How to mark a Participant...
1 Right-click on the Participant name.
2 Select the Login State from the menu.
ADDING A PARTICIPANT
A Participant can only be added if ‘Add Participant Allowed = Yes.’ This option can be found in the Blueprint Overview.
The Blueprint Overview will also determine if a new Participant can be added after the exam has already started. For
more information, see
Understanding the Blueprint Overview on page 17.
How to add a Participant...
1 While in the Exam Room, click Add Participant.
Add Participant
NOTE
When the Participant logs in with the New Device, they should review all of
the responses that were downloaded match what was entered on the
previous device. Since a Final Send was not completed from the previous
card, any responses entered or changed on the ResponseCard NXT that
were not received by the Proctor Application will not be downloaded to the
New Device.
NOTE
Marking a Participant Complete will use existing responses received by
the Triton Proctor Application as the Participant's final responses. Any
responses entered or changed on the ResponseCard NXT that were not
received by the Proctor Application will not be in the final results set. For
the most accurate responses, Participants should always complete a Final
Send from the ResponseCard NXT.